View EMPCD081A_1237275.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
Product Specification
DOC. VERSION 0.3
ELAN MICROELECTRONICS CORP.
September 2004
Trademark Acknowledgments: IBM is a registered trademark and PS/2 is a trademark of IBM. Windows is a trademark of Microsoft Corporation. ELAN and ELAN logo are trademarks of ELAN Microelectronics Corporation.
Copyright (c) 2004 by ELAN Microelectronics Corporation
All Rights Reserved
Printed in Taiwan
The contents of this specification are subject to change without further notice. ELAN Microelectronics assumes no responsibility concerning the accuracy, adequacy, or completeness of this specification. ELAN Microelectronics makes no commitment to update, or to keep current the information and material contained in this specification. Such information and material may change to conform to each confirmed order. In no event shall ELAN Microelectronics be made responsible for any claims attributed to errors, omissions, or other inaccuracies in the information or material contained in this specification. ELAN Microelectronics shall not be liable for direct, indirect, special incidental, or consequential damages arising from the use of such information or material. The software (if any) described in this specification is furnished under a license or nondisclosure agreement, and may be used or copied only in accordance with the terms of such agreement. ELAN Microelectronics products are not intended for use in life support appliances, devices, or systems. Use of ELAN Microelectronics product in such applications is not supported and is prohibited. NO PART OF THIS SPECIFICATION MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN PERMISSION OF ELAN MICROELECTRONICS.
ELAN MICROELECTRONICS CORPORATION
Headquarters: No. 12, Innovation Road 1 Hsinchu Science Park Hsinchu, Taiwan 30077 Tel: +886 3 563-9977 Fax: +886 3 563-9966 http://www.emc.com.tw Hong Kong: Elan (HK) Microelectronics Corporation, Ltd. Flat A, 19/F., World Tech Centre 95 How Ming Street, Kwun Tong Kowloon , HONG KONG Tel: +852 2723-3376 Fax: +852 2723-7780 elanhk@emc.com.hk Shenzhen: Elan Microelectronics Shenzhen, Ltd. SSMEC Bldg., 3F, Gaoxin S. Ave. Shenzhen Hi-Tech Industrial Park Shenzhen, Guandong, CHINA Tel: +86 755 2601-0565 Fax: +86 755 2601-0500 USA: Elan Information Technology Group (USA) 1821 Saratoga Ave., Suite 250 Saratoga, CA 95070 USA Tel: +1 408 366-8225 Fax: +1 408 366-8220
Europe: Elan Microelectronics Corp. (Europe) Siewerdtstrasse 105 8050 Zurich, SWITZERLAND Tel: +41 43 299-4060 Fax: +41 43 299-4079 http://www.elan-europe.com
Shanghai: Elan Microelectronics Shanghai, Ltd. 23/Bldg. #115 Lane 572, Bibo Road Zhangjiang Hi-Tech Park Shanghai, CHINA Tel: +86 21 5080-3866 Fax: +86 21 5080-4600
Contents
Contents
1 2 3 4 General Description .................................................................................................. 1 Features ..................................................................................................................... 1 Pin Descriptions........................................................................................................ 2 Function Descriptions .............................................................................................. 2 A) Operation Characteristics ....................................................................................... 2 B) Keyboard Descripion .............................................................................................. 4 C) Error Conditions ..................................................................................................... 7 D) Lcd Display............................................................................................................. 8 5 6 7 8 E) Waveforms For Display .......................................................................................... 9 Absolute Maximum Ratings ................................................................................... 10 Electrical Characteristics ....................................................................................... 10 Application Circuit .................................................................................................. 12 Pad Diagram ............................................................................................................ 13
Product Specification (V0.3) 09.15.2004
* iii
Contents
Specification Revision History
Doc. Version 0.1 0.2 0.3 Initial version a. b. c. Modify PIN DESCRIPTIONS in page4. Delete K11 and K12 in page6. Modify LCD display S1A9 and S2B9 in page11. 2004/09/15 2004/05/10 Revision Description Date 2004/05/04
a. Modify DC spec. of IDDOP as page14.
iv *
Product Specification (V0.3) 09.15.2004
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
1
General Description
The EMPCD081A is a single-chip LS1 CMOS calculator for 8-digit 1 memory. Besides, the EMPCD081A is an arithmetic four standard types of general function (+, -, x, /), TAX / EURO function, percentage calculation functions, leading zero and trailing zero suppression, chain calculations, MU calculation, Auto Power OFF available. Dual power supply operation, wide operating voltage, and lower power consumption make it suitable for 1.5 solar battery operated calculator.
2
Features
Display : 8-digit of data, 1-digits of sign, error, memory load symbol. TAX / EURO function available. Algebraic mode. Standard 4 function (addition, subtraction, multiplication, division). Memory calculation. Automatic percentage operation with add-on discount. Constant calculation. Chain calculation. Change sign. Trailing zero suppression. Punction on display, commas for thousands. Memory contents indicator, turned on with nonzero in the memory. Result overflow, indicating during calculation (most function key are locked as it happened). Memory overflow indicating. Complementary output buffer for direct driving of liquid crystal display. Oscillator/clock generator internal to chip. Keyboard encoding internal to chip. Automatic power on clear. Wide supply voltage range (1.2 to 1.8V) Very low power consumption. Floating minus. Two key roll over available.
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
*1
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
3
Pin Descriptions
Symbol COM1~3 A1 ~ A3 A4 ~ A13 B1 ~ B3 B4 ~ B13 C1 ~ C2 C3 ~ C13 VDD,VSS VA,VB VEE TS1 RESET K0 ~ K2 K3 ~ K7 K8 ~ K10 K11~K14 I/O O O O O O O O ------I I O I/O I I LCD Common signal output. LCD Segment signal output and strobe output for switch status. LCD Segment signal output. LCD Segment signal output and strobe output for switch status. LCD Segment signal output. LCD Segment signal output and strobe output for switch status. LCD Segment signal output. Positive and negative power supply pin. Voltage doubler for LCD, connects a capacitor (0.1uF) between both pins. LCD voltage from voltage doubler, connects a capacitor (0.1uF) to pin VDD. Test pin input, be opened. System reset / AC key input. (built-in schmitt trigger for debouncing) Keyboard polling signal output pins. Keyboard polling signal output and strobe input pins. Keyboard strobe input pins. Switch status strobe input pins. Function
4
Function Descriptions
A) Operation Characteristics
CONSTANT OPERATION The EM34011 has implied constant mode on +, -, X, / and % operations. The constant is performed automatically by the "=" key, "%" key, or "%" key without a constant for addition, subtraction and division while the first operand is the constant for multiplication. NUMBER ENTRY Numbericals can be entered up to 8-digit. MEMORY PROTECTION In any error detection, the memory contents present before the error detection are protected. MEMORY INDICATION If the memory contents are a number other than zero, "M" is indicated in the sign-digit position. AUTO POWER OFF If no key is depressed for a specific period of time, the power supply will automatically turn off .
2*
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type) KEY DEFINITION Touch Key Constitution
Lock Key Constitution
K14 : Select with TAX / EURO function and Memory Hold Status, MH (Memory Hold), MK (Memory Kill), GTH (GT Memory Hold) and GTK (GT Memory Kill) at Auto Power OFF or OFF key. K13 : Select with Auto Power OFF mode (A) and Grand total function (GT).
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
*3
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
B) Keyboard Descripion
EQUAL KEY (=) Performs Keyed-in operation and maintains that operation for possible use. Establishes power/reciprocation calculation. MULTIPLICATION KEY (X) Enters multiplicand. Performs previous operation and displays result. DIVISION KEY (/) Enters dividend. Performs previous operation and displays result. ADDITION KEY (+) Conditions machine for an addition. Performs previous operation and displays result. SUBTRACTION KEY (-) Conditions machine for a subtraction. Performs previous operation and displays result. PERCENT KEY (%) The purpose of the percent key is to allow for calculation of add-on and discount. Determination of add-on requires the principal amount to be the first entry followed by the "+" or "X" key, with the percentage being the second entry. Depression of the percent key yields the amount to add on, such as tax or interest. Depression of the "=" key adds this amount to the principal. CHANGE SIGN KEY (+/-) Pushing the "+/-" key twice in succession causes the corresponding sign to appear and disappear. During digit entry, this function changes he sign of the entered factor.
4*
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type) POWER ON/ALL CLEAR KEY (ON/AC) First push power-on displays "0". In the middle of a digit entry, a second push will clear all operating register. CLEAR ENTRY/CLEAR KEY (CE/C) During the digit entry, the first depression will clear the entry register. And display the previous enter number again. The second push will clear all registers. CLEAR ENTRY KEY (CE) During the digit entry will clear the entry register and display number "0". SQUARE ROOT KEY ( )
Extracts the square root of a positive number displayed in the entry register. MEMORY PLUS KEY (M+) Adds the current display to the contents of memory. It will terminate a number entry. MEMORY MINUS KEY (M-) Subtracts the current display from the contents of memory It will terminate a number entry. MEMORY RECALL AND CLEAR KEY (RCM) First push, as RM key, transfers the contents of the memory register into the display register. Second push, as CM key, clears the memory. MARK-UP KEY (MU) Execute add-on calculation by A (x) B (MU) or discount calculation by A (x) B (+/-) (MU). Execute selling price (mark-up) calculation by A [/] B [MU] or cost (mark-down) calculation by A [/] B [+/-] [MU]. When intermediate result of addition and subtraction is displayed, execute changing rate calculation, which is increase rate calculation by A [+] B [-] [MU] or growing rate calculation by A [+] B [+] [MU].
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
*5
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type) NUMBER, DECIMAL KEY ("00", "0 - 9", "*") The first number key in a sequence will clear the display and enter the digit in the display. Successive entries will shift the display left and enters the data in display register. The first decimal point entered is effective. An attempted entry of more than 8 digits or 7 decimal places will be ignored. SHIFT KEY Delete the rightest digit and others will shift to right. TAX+ (TAX+) Execute TAX-including calculation of displayed number, TAX rate is in TAX memory. In the halfway of four rules of arithmetic, TAX-including calculation don't break the intermediate result, so TAX-including is used in expression. When immediately after [RATE] key, store displayed number in TAX memory. TAX- (TAX-) Execute TAX-excluding calculation of displayed number, TAX rate is in TAX memory. In the halfway of four rules of arithmetic, TAX-excluding calculation don't break the intermediate result, so TAX-excluding is used in expression. ERUO KEY (EURO) The depressing will perform the conversion of "key-in number/rate". The result is automatically rounded to 2 decimal. After LOCAL key is depressed and make the conversion, the depressing of EURO key will recall the key-in number. LOCAL KEY (LOCAL) The depressing will perform the conversion of "key-in number x rate". The result is automatically rounded to 2 decimal. After EURO key is depressed and make the conversion, the depressing of LOCAL key will recall the key-in number. TAX RATE SET KEY (RATE) The depressing will save the entry number as TAX / EURO rate.
6*
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
C) Error Conditions
ERROR DETECTION System errors occur when : The integral part of any calculation result exceeds 8 digits. The integral part of any memory calculation result exceeds 8-digit or when the integral part of any addend or subtrahend to memory exceeds 8-digit. A division by zero is attempted. ERROR INDICATION System error : "0" is indicated in the first-digit position and "E" in the sign-digit position. The high-order 8-digit of a calculation result is indicated together with "E". The location of the decimal point corresponds to the result of calculation times le-8, and no zero shift is performed. ERROR RELEASE System error : A system error can be released by depressing ON/AC key or CE/C key. However the calculation result is not cleared by CE/C key but is retained.
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
*7
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
D) Lcd Display
INTER CONNECTION OF LCD (TAX FUNCTION)
INTER CONNECTION OF LCD (EURO FUNCTION)
8*
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
E) Waveforms For Display
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
*9
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
5
Absolute Maximum Ratings
Items Supply Voltage Input Voltage Operating Temperature Storage Temperature Sym. VDD-VSS VIN TOP TSTG Min. -0.3 -0.3 0 -55 Max. 2.0 VDD+0.3 50 +125 Unit V V
OC OC
6
Electrical Characteristics
(VDD=1.5V+0.3V, VSS=0V, TA=25 o C, VEE=3.0+0.4V)
Parameter Pin Name K3~K10 K11~K14 K3~K14 RESET RESET SEGMENT COM1~3 SEGMENT COM1~3 COM1~3 K0~K7 K0~K7 SEGMENT COM1~3 SEGMENT COM1~3 Sym. VDD VIH(1) VIH(2) VIL(1) VIH(3) VIL(2) VOH(1) Min. 1.2 VDD-0.4 VEE-0.4 0 0.6 VDD 0 VEE-0.2 Typ. 1.5 Max. 1.8 VDD VEE 0.4 VDD 0.4 VDD VEE Unit V V V V V V V VDD=1.5V VDD=1.5V Condition
Operating Voltage "1" Input Voltage "1" Input Voltage "0" Input Voltage "1" Input Voltage "0" Input Voltage "1" Output Voltage
"0" Output Voltage "M" Output Voltage "1" Output Voltage "0" Output Voltage "1" Output Resistance
VOL(1) VOM VOH(2) VOL(2) ROH
0 VDD-0.2 VDD-0.2 0 -
-
0.2 VDD+0.2 VDD 0.2 70
V V V V K VOUT=VEE-0.5V
"0" Output Resistance
ROL
-
-
70
K
VOUT=0.5V
10 *
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
Parameter Key Pull Down Resistance Key Pull Up Resistance Switch Pull Down Resistance Oscillating Frequency Frame Frequency
Name K0~K10
Sym. RKEYL(1) RKEYH(1) RKEYH(2) RSW(1) FWAIT FOP fF IDDWAIT IDDOP IDDOFF
Min. 100 50 240 10.8 120 56.3 62.5 -
Typ. 180 400 18 200 93.8 104 3.0 13 -
Max. 650 10 370 800 25.2 280 131.3 145.6 4.5 20 1.0
Unit K K K K KHz KHz Hz Hz
Condition VOUT=VDD= 1.2~1.8V
K0~K7 RESET K11~K14
VOUT=0.5V
VOUT=VEE
(Wait) TS1 (Operate) TS1 SEGMENT COM1~3 1 (WAIT)
VDD=1.2 ~ 1.8V Wait clock Fast clock VDD=1.5V, no load VDD=1.5V, no load VDD=1.5V, no load
Supply Current
2 (OPERATE) 3 (OFF)
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
* 11
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
7
Application Circuit
12 *
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
8
Pad Diagram
Pad No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Symbol C13 B13 A13 C12 B12 A12 C11 B11 A11 C10 B10 A10 C9 B9 A9 C8 B8 A8 C7 B7 A7 C6 B6 A6 C5
X 1510.0 1400.0 1290.0 1180.0 1070.0 960.0 850.0 740.0 630.0 520.0 410.0 300.0 190.0 80.0 -30.0 -140.0 -250.0 -360.0 -470.0 -580.0 -690.0 -800.0 -910.0 -1020.0 -1130.0
Y 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0 350.0
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
* 13
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
Pad No. 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
Symbol B5 A5 C4 B4 A4 C3 B3 A3 C2 B2 A2 C1 B1 A1 COM3 COM2 COM1 K14 K13 K12 K11 K10 K9 K8 K7 K6 K5 K4 K3 K2 K1 K0 RESET TS1 VDD VSS VB VA VEE
X -1240.0 -1350.0 -1460.0 -1570.0 -1680.0 -1680.0 -1570.0 -1460.0 -1350.0 -1240.0 -1130.0 -1020.0 -910.0 -800.0 -690.0 -580.0 -470.0 -360.0 -250.0 -140.0 -30.0 98.0 208.0 318.0 428.0 538.0 648.0 758.0 868.0 978.0 1088.0 1198.0 1308.0 1418.0 1540.1 1666.7 1675.0 1675.0 1634.0
Y 350.0 350.0 350.0 350.0 350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -350.0 -59.3 130.7 350.0
Chip size:3620 x 1010 um
NOTE For PCB layout, IC substrate must be connected to VSS. 14 * Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
EMPCD081A
8-Digit Calculator With Tax / Euro Function (Battery / Solar / Dual Power Type)
Product Specification (V0.3) 09.15.2004
(This specification is subject to change without further notice)
* 15

▲Up To Search▲

Price & Availability of EMPCD081A

	To Download EMPCD081A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .